Well pump replacement cost: prices by type and depth

Well pump prices by type

These are Angi’s 2026 ranges for the pump itself, before installation. Pumps alone run from about $400 to $6,500 (Angi).

• Shallow well jet pump (wells of 25 feet or less): $450 to $1,500
• Deep well jet pump (up to about 150 feet): $800 to $2,200 or more
• Submersible pump: $1,000 to $2,500 or more
• Constant-pressure pump: $1,300 to $4,000 or more

Prices by well depth

Angi’s 2026 ranges are about $400 to $3,000 for wells under 25 feet, $1,200 to $5,500 for 25 to 150 feet and $2,000 to $10,000 or more for wells deeper than 150 feet (Angi).

Signs your well pump is failing

• Low water pressure, or no water at all
• The pump runs constantly or cycles on and off
• New noises from the pump or pressure tank
• A higher electric bill with no other explanation
• Sediment, air spurting from faucets, or dirty or smelly water

Angi notes that if the pump kicks on every time you run water, the pressure tank may be the problem rather than the pump (Angi). Ask for a diagnosis before you agree to a new pump.

How to pay less

• Ask about a repair first. A bad switch, tank or wire may cost far less than a new pump (Angi).
• Get three quotes for the same pump type and warranty.
• Don’t wait. Angi advises acting on warning signs early instead of putting off a repair (Angi).

Your well, your responsibility

EPA says private well owners are responsible for the safety of their own water, which isn’t regulated under the federal Safe Drinking Water Act (EPA). EPA recommends testing every year for total coliform bacteria, nitrates, total dissolved solids and pH, and testing right away after flooding, after any repair or replacement, or if the water’s taste, odor or color changes. Your local health department may test for free or point you to a certified lab (EPA).

Would a home warranty help with the next well pump bill?

A home warranty is a service contract that helps pay to repair or replace some home systems and appliances. Know these numbers before you buy:

• Price. The DC Attorney General says a basic home warranty costs $500 a year or more (DC Attorney General). NerdWallet’s average was about $876 a year (NerdWallet).
• Service fee. You usually pay a fee for each repair visit, typically $75 or more (DC Attorney General). NerdWallet found an average of about $108 (NerdWallet).
• Is the item covered? Some plans exclude kitchen appliances, water heaters, furnaces and other major appliances, or charge extra to cover them (DC Attorney General).
• Caps and exclusions. Claims can be capped. Contracts can exclude wear and tear, manufacturer defects and problems from skipped maintenance. The company may repair rather than replace, and may pick the contractor (DC Attorney General).

Check whether a plan covers well pumps or sells them as an add-on, and what its payout cap is. Don’t count on a brand-new plan to pay for something that’s already broken; read when coverage starts and what it excludes. See our home warranty cost guide.